We have encountered the article pertaining to How to Find and Shut Off Main Water Shutoff Valve down the page on the net and figured it made good sense to write about it with you here.
One of the most usual areas a water main will be located in home is in your boiler room, basement, or a cut out panel in a section for your home.
Once you find the water main you will simply turn the valve clockwise to shut all the water off in your home until you have finished the repair. Some homes will have a ball valve with a bar that you can draw as opposed to resort to close the water off.
If you attempt to close the water off to your components by utilizing an angle stop and that doesn't work you will certainly need to shut of the water main to make your repair work. There are also many other factors you could require to shut the water main like repairing frozen pipelines, fixing leakages, replacing fixtures or faucets.
Many people are not mindful that they also have a water pipe valve right in their own house and also simply call a plumber of never wind up doing the repair up until things get really poor because they simply do not know that shutting the water pipe is actually simple.
How to Find and Shut Off Main Water Shutoff Valve
Where is the main water shutoff valve located?
This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.
How to Turn Off Main Water Valve
Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.
If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.
Where are the isolation valves?
Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.
Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.
Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.
Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.
https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/
As a passionate person who reads about How to Find and Shut Off Main Water Shutoff Valve, I assumed sharing that segment was a good thing. For those who enjoyed reading our blog posting please do not forget to share it. I cherish reading our article about How to Locate & Turn Off Main Water Shut-Off Valves.
Book Your Service